Dry Spray

Description

Granular texture normally with no gloss at all. This defect is normally limited to small areas.

Origin and Potential Causes:

• · Incorrect viscosity.
• · Improper choice of thinner, reducer or activator; generally, too fast for spray conditions.
• · Spraying too fast.
• · Air pressure too high.
• · Spray gun too far from surface while applying.
• · Improper spray gun setup.
   
• Prevention Techniques:
   
• · Follow recommendations on the Technical Data Sheet for mixing ratio and reduction, appropriate to spray conditions.
• · Adjust spray gun settings, spray pattern, fluid feed.
• · Use recommended air pressure.
• Remedy:

Allow the paint to dry and then sand. After sanding, and depending on the magnitude of the defect, re spraying or polishing will be necessary.