|
Origin and Potential Causes:
· Inadequate lighting in the spray booth.
· Color was not well mixed/stirred.
· Too much thinner was used. · Substrate's color was not correct.
· Substrate not uniform (effect finishes).
· Color coat has insufficient film thickness.
Prevention Techniques:
·Use recommended thinner.
· Install good lighting equipment.
· Verify proper spray gun setup.
· Mix/stir all colors/ tinting thoroughly.
· Use the appropriate Value Shade ™ undercoat.
· Spray sufficient color to obtain hiding.
Remedy:
Allow the finish to properly dry, then sand and refinish.
|
